CPU Mining RAM (*14*)
In this video I check out how RAM results (*14*) CPUs with 2 sticks, 1 stick, xmp on and xmp off over cl 14 and cl 16 kits.
Rabid Mining Discord: https://discord.gg/wXkMhztBDx
Rabid Mining Website: www.rabidmining.com
Parallel Miner Referral: https://www.parallelminer.com/?wpam_id=197
CPU…
Thanks for the informative video! I would like to see a review on the mining ecosystem of Utopia. Available for almost every user, RAM 4GB.
thank you
nice work , man
Thanks you buddy !
Thank you! I bought two modules of cl 16 at 3200 Mhz. Probably the new ones, like me, mining raptoreum are late, because of the increasing difficulty. Which other coin you recomend to mine with the CPU which has lower difficulty and pottential price growth?
i just realised what is wrong here, you had lower hashes on CL14, which means your CL14 rams clock is lower then CL16! normally you need to compare RAM on same clock. 3200CL14VS3200CL16 vs stock. + good idea to see 3600 and CL18 (1:1 ratio from FCLK). i think resul can be the same, better hwatt will be on stock clocks, but who knows…
Have you tried 3600mhz memory of various timings by any chance?
Hey RM, do you recommend the same G.Skill CL14 ram for the Ryzen 9 5900x?
you did not try with raptoreum?
Did Youtube delete my comment?
that paper benchmark is dope though..
Nice vid , but you could have used HWinfo to check power consum.
Hey whats the thing you used to show the power draw from the wall?
Can i get a link where to get it
I’m mining haven with 3900x CL14 Xflare directly on herominers 1376 h/s. Personally it’s the most profitable coin for me, and power efficient. I got 3x 3900x rigs 2 of those Asrock B550M 1376 h/s each, third rig is using Asus B550F 1364 h/s. All 3 CL14 XFlare 16gb. All 3 CTR tuned,
In summary, you want the most power efficient ram that makes use of both channels and dual rank. Overclocking settings are actually a detriment to efficiency.
May I introduce you to ECC-RDimms? The lowest possible voltage with error correction AND Registered modules take further load off the CPU memory controller reducing power consumption. Think of threadripper pro with 8 channels of ECC-RDIMM. That is 16 ranks of error correcting bandwidth at 1.2V.
Error correcting is a big deal too. I have noticed that my non ECC memory rigs will require a reboot about once a week. Anything with ECC just keeps humming along with no down time. That alone makes ECC worth the extra cost.
Hum, probably the best would be DDR4 3800 to match AMD's Infinity Fabric Clock Speed, but it's expensive and is 1.40v memory.
that those not work like that you have the frequency also overclok the memory and then you have a diference
Rabid…. Rabid… Rabid.
This is badass!!
Thank you.
I have 2 16 GB CL 16s to put with my Ryzen 9 3950X.
Dont use Dram calculator to make lower cl ? Lower cl more hashs 😛 i make my 5950x mining all core almost 18k hashrate on xmr on cl14 whit balistix cheep one 😛
Hi Rabid, how did you make moneroocean miner to use specific algorithm?
Why not give the daily earnings ? What were they for Haven vs Monero?
I go for maximum hashrate since the difference is pennies per day, and in a couple years XMR will have a value far outweighing any savings of watts (would rather have maximum XMR at that point than warm-fuzzies that I saved a few KWh). I also run as much equipment as possible even if it's terrible H/W, again because I'll be happy I have maximum XMR when it hits maximum price later. Shaving watts only makes sense for cash-out-immediate plans (profit "now" vs profit when it matures).
Awesome video rabid. Doing the research so we dont have to.
Out if curiosity, how much do you pay per kw/h in electricy?
Rabid you have 3950x next time 🙂 my 3950x on nice hash with stock clock and ram settjnhs xmp on I get about 16000h/s sometimes 17000h/s is that ok?
Thanks for your video, really helpful. One question – when you turn off XMP, I know the RAM frequency goes down, but does the CL stay the same?
I'm pulling 12449 H/s on 23 of 24 cores w/ my 3900x. 32g of 3600 cl 16 ram. cpu power draw of 89watts. I leave one core unused so the gpu miners can run on the open thread.
Hi big Fan of your channel , is there any way you can test 4 sticks of 8gb? or if your rich , 4 sticks of 16gbs….. 🙂
👁👄👁
From CL16 to CL14 on NH randomX I gained 700ish hash stock. 3900x with ripjaw 3200 14 13777hash stock clocks but XMP on.
Am i number four?
in short, which configuration most better for mining xmr out of these RAMs? because also we have cl 18.
Yeet
Second one
First one " 😊😊✌